Jump to content

VeeDubs_29

Forum Member
  • Content count

    560
  • Joined

  • Last visited

5 Followers

About VeeDubs_29

  • Rank
    iDubber Leg End
  • Birthday 03/21/1978

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    Cirencester
  • Gender
    Male
  • Interests
    Dubs, Scoobs & ladies
  1. Veedubs MK4 Bolf 1.8T, Bagged, smooth & 2 Tone

    Deffo The End..... Due to an immanent purchase of a Hawkeye STI which i will be spending all my time on, the Bolf needs to go. i'm not really interested in selling outright, would like to swap for something more practical. LIke Audi A4, BMW 320D ect. It will need a custom map by R-Tec as the car is overboosting on the map i have at the moment but i cannot be bothered to make the long drive up there. May even decide to break the car to be honest. Here's how she stands at the moment; I will put an advert up in the correct section over the weekend as I would like to get a more practical car to use everyday and keep the new Scooby for fun........
  2. Has anyone used Injectortune.co.uk

    A liitle late but I bought a set of Saab Red injectors from EBay and used Injectortune.co.uk to get them ultrasonicaly cleaned. You get a full report for each injector, with both before and after cleaning results. Replacement filters, spacers, pintle caps and o rings also fitted. Reclaimed 42cc through cleaning on mine. Think I paid around £60 all in.
  3. Injector spacers

    All sorted now. Ordered the spacers from US Rally Team in the states and they arrived today. Will do the job until i can afford new injectors.
  4. Extending Engine loom Wiring

    I need to extend the injector wiring loom and a couple of engine connector looms on my MK4 Golf 1.8T and was wondering what's the best wire to use to complete this job. Many thanks Barry
  5. Injector spacers

    No it's not essential I use this rail but I want to. Going to have another look today but have a bit more spare cash now do might just buy new injectors. Oh, yes the rail fixings are on the correct way.
  6. Injector spacers

    Bump....
  7. Injector spacers

    No, already looked into doing that but the connectors would not fit the injectors with the rail sitting lower down. And I don't think the brackets would be strong enough if cut down.
  8. Injector spacers

    Standard AGU Manifold with 034M Fuel rail and SAAB red injectors. The easy option is to just buy new injectors that will fit but I don't really have that sort of money spare at the moment. And I've had the Saab ones tested and cleaned.
  9. Injector spacers

    Yeah, I forgot to do that last night. Will put a photo up later.
  10. Injector spacers

    Sorry if this is the wrong section. I have a high flow fuel rail and Saab red injectors that I need to fit to my stock AGU manifold. When I fitted the new fuel rail there's a gap between the top of the injectors and the fuel rail. Now, I believe you can get spacers which fit on top of the injectors but am struggling to find some. Plenty of spacers to make the fuel rail sit higher but that's no good. Can anyone help with sourcing a set as I cannot seem to find anyone that stock the spacers I need. Any help would be much appreciated. Many thanks.
  11. ECU Part No.

    Thank you very much for the information, that's a great help. Will have a better look when I get home as I cannot expand the image above on my iPhone. I know it's a lot of work, just to fit a set of full height display clocks but it's something I want to do now that I'm 100% keeping my car.
  12. ECU Part No.

    Thank you very much for the information, that's a great help. Will have a better look when I get home as I cannot expand the image above on my iPhone. I know it's a lot of work, just to fit a set of full height display clocks but it's something I want to do now that I'm 100% keeping my car.
  13. ECU Part No.

    I have the early AGU with throttle cable. To fit a set of the full height display clocks I need an ECU from the later AGU and have to run two extra wires to the new clocks. Ray has given me this information as I have no idea myself......
  14. ECU Part No.

    Bump...
  15. MK4 Golf by Kamil

    Jas87, How's your cousin Jolla? It seems that he's still logging on to Edition38 but is refusing to get in contact with me regarding the £100 he took from me months ago. I guess I'm being unreasonable, asking him to refund me the £100 for the manifold I never received. If you are in contact with him then please tell him to check his messages and reply. I have copies of all messages from him and yourself as well as my paypal receipt and will be using this to take further action. OP, sorry for jumping in on your thread, but these guys are not replying to my messages. Many apologies....
×