Is that the bonnet you use at shows James, if so, I hate to imagine how many layers of wax it has ..
Yer, one of three, this is the one that goes on the "try before you buy table" at the indoor events, its a little swirled up right now, im going to strip it all back and correct up half before wax stock and leave the other side to demo Tripple on.
The MK2 bonnet is the worst right now im trying to get it to fade before the show but my best efforts are failing right now
So no micro abrasives? Just fillers?
It has DAT, micro diminishing abrasives yes, thats the key to a good AiO
Yes it does have very very fine micro abrasives in that generally will work along the lines of rounding edges of swirls off then leaving the glaze to fill the remainder. Its what a product should do , it means that light cannot hit an edge but bounces off at a variety of degrees which in turn combined with filling leaves an almost corrected apperance. The other main thing is it doesnt dust like srp , its filling ability is on a par and we all know its srp,s strongest point but Tripple blows it away on looks. Ive sent a long email off to Autofinesse stating if they could product a product that works aswell as tripple in its glazing abilities without the final lsp installed it would probably be in gallon drums in my work area. I do believe they are working on something now along these lines..
Its been in the pipeline a while now mate, im pretty sure you will like it, i have all the labeling etc in, i just need to get it on the line and filled/labeled up.
Edited by James-B, 03 August 2012 - 07:52 PM.