Jump to content

patmore

Forum Member
  • Content Count

    379
  • Joined

  • Last visited

Everything posted by patmore

  1. patmore

    G60 bottom pulley

    Hi all, I’m on the middle of sorting bits on my G60, I’m looking at swapping the crank bolt as I know they are prone to snapping, I’ve removed the bottom pulley and it has separated, I’m not running PAS so my question is can I remove this heavy lump and just run the 6pk belt or do I need the v belt insert? Also is there any decent upgrades ?
  2. patmore

    AGU head on PB lump

    I am just interested to know if this head would work on a 1.8 8v pb bottom end ? i have a spare AGU head laying about that has been gas flowed and skimmed, i need to do a head gasket change anyway so the 8v head needs to come off. will there be any gains from this ? or will it be a terrible idea ? also would i have to run a new ecu or would the carb option be the only way ?
  3. patmore

    AGU head on PB lump

    Ok cheers
  4. patmore

    Mk2 Jetta pb

    Hi all I've recently put a digifant 2 engine and ecu in my car, it was originally carbed, I blew my first ecu up and have purchased a new one, plugged it in and fired up first time every time. Then I unplugged the engine loom a wrapped it since then it's not started again I've unwrapped the loom and I can't see any problems, also I have a remote fuel pump relay that is continually clicking as I'm cranking the engine, anyone have any ideas ? I've got spark and compression and I have fuel up to the rail but not sure if the relay is the problem.
  5. patmore

    Mk2 Jetta pb

    Ok I'll get a multi meter on it tonight. I've tried both the relays I have both do the same. I'm using number 53 is this ok ?
  6. patmore

    Mk2 Jetta pb

    Ignition feed, but it was working before like this
  7. Hi all I have recently put a 20vt in my mk2 but I don't know what bolts to use on my front engine mount? I'm issuing an 02A DPA gearbox from an ABF, and my original bolts are too short, and the ABF bolts are too fat,
  8. patmore

    Mk2 jetta front engine mount issue

    Yer the mk2 one is from 020, that's what I'll use, cheers dude I've ordered some bolts from eBay now so hopefully with the mk2 mount it should work
  9. patmore

    Mk2 jetta front engine mount issue

    Ok I have both mounts but I would rather use the mk2 mount but the bolts still aren't long enough
  10. patmore

    Mk2 jetta front engine mount issue

    If I use the corrado one will I need to change the crossmember? Or get a solid engine mount ? Also what's the difference?
  11. patmore

    Mk2 jetta front engine mount issue

    Yer my original mk2 ones are too short and the new ones are a bigger thread so they don't screw into to mount
  12. patmore

    mk2 jetta 20vt no spark agu

    hi all firstly i would like to know if its a problem that i have a 10 pin engine loom and a 14 pin fusebox side on my early age ?? also do i need to relay the ecu ?
  13. not much longer now

  14. patmore

    mk2 jetta 20vt no spark agu

    ok so could this be why i have no spark ? because of the relay ? also are the wires all the same colour ? from 10 block to 14 ?
  15. patmore

    1988 polar silver mk2

    i can't wait to see this
  16. patmore

    Poly bush or not?

    i run the orange proflex poly bush kit on the front of my Jetta also i run solid camber adjustable top mounts. it's a very stiff ride but only due to the fact I'm on the bump stops only because of my obsession to run it as low as i can. but if your running it at a sensible hight i would highly recommend polybush kit makes it feel so precise especially with the steering rack poly bushes
  17. patmore

    1.8t mk2 fuelling

    cool thanks
  18. patmore

    1.8t mk2 fuelling

    My car is a 1.8 carb and I'm putting an agu in it I would like to know Do I replace the intank lift pump Can I use the one from the a3 donner car ? If I get a kjet fuel pump will I still need an intank pump ? And what fuel lines do I need ?
  19. patmore

    1.8t mk2 fuelling

    Amazing cheers could I not get a mk3 lift pump to fit the mk2 tank ?
  20. patmore

    1.8t mk2 fuelling

    Ok cool I think beacause of the amount of mk3 gti's and vr's there are about the easyist thing would be mk3 tank and lines do I need filter assembly? Or can I just run a straight line ?
  21. patmore

    1.8t mk2 fuelling

    ok before i go and buy a fuel tank and pump i just want to clear up that the a3 agu pump won't fit or work as i already have the car
  22. patmore

    1.8t mk2 fuelling

    can I use the a3 system ?
  23. patmore

    agu a3 into a mk2 jetta

    hi all now i know this has been asked so many times but does any one have a definitive answer for me please, my jetta is a 1.8 carb and I'm looking at running the agu on oem management but retaining the dials from the mk2. what can i use from the a3 on the jetta ? and also can someone produce a list of items i will need to complete the conversion? i already have -the whole a3 donner pre face lift agu cable throttle -passat b3 hydro clutch
  24. patmore

    agu a3 into a mk2 jetta

    Can I use the A3 in tank fuel pump ?
  25. patmore

    Mk2 Golf 1.8 GTI - 1.8T 20v

    this looks unreal already, I'm eager to see an update keep it up. what management are you going to run ?
×